VITALS

	MANUFACTURER	ROLAND
	RELEASE	WINTER 2018
	TYPE	HARDWARE

	NOTES FROM THE UNDERGROUND

▼▼▼

		SPECIFICATIONS Maximum Polyphony 12 voices Recordable Data Samples: 120 (12 samples × 10 banks) (stored on SD card) Patterns: 120 (12 patterns × 10 banks) (stored on SD card) Sampling Time (Total time for all samples) The maximum sampling time (size) for a single sample is approximately 180 minutes in stereo (2 GB). The following shows the approximate total sampling time of the samples that can be stored on one SD card. Card capacity / Stereo (Mono) 1 GB / Approx. 90 min. (180 min.) 2 GB / Approx. 180 min. (360 min.) 4 GB / Approx. 360 min. (720 min.) 8 GB / Approx. 720 min. (24 hours) 16 GB / Approx. 24 hours (48 hours) 32 GB / Approx.48 hours (96 hours) Since the SD card included with the SP-404A contains preload data, the available sampling time will be less than the time above. Data Format 16-bit linear (.wav/.aiff) Sampling Frequency 44.1 kHz Pattern Sequencer Maximum recordable notes: Approx. 16,000 notes Resolution: 96 ticks per quarter note Pattern length: 1–99 measures Recording method: Realtime Loop Recording (with shuffle quantize function) Effects 29 types Pads 12 + Sub pad × 1 Controllers Control knob × 3 Display 7 segments, 3 characters (LED) Onboard Mic Mono × 1 Connectors LINE IN jacks (L, R) (RCA phono type) LINE OUT jacks (L, R) (RCA phono type) PHONES jack (Stereo 1/4-inch phone type) MIC IN jack (1/4-inch phone type) MIDI IN connector DC IN jack SD card slot Power Supply AC Adaptor or Alkaline battery (AA, LR6)/Rechargeable Ni-MH battery (AA, HR6) × 6 *Batteries sold separately Battery Life for Continuous Use Rechargeable Ni-MH battery: Approximately 5 hours (When using batteries having a capacity of 1,900 mAh.) Alkaline battery: Approximately 4 hours *These figures will vary depending on the actual conditions of use. Current Draw 450 mA Accessories SD Card AC Adaptor Owner’s Manual roland.com

▲▲▲